Top Suppliers 1.5″ hamburger head Water distributors F 182X for India Factory
Top Suppliers 1.5″ hamburger head Water distributors F 182X for India Factory Detail:
Product detail pictures:
To become the stage of realizing dreams of our employees! To build a happier, additional united and additional experienced team! To reach a mutual gain of our clients, suppliers, the society and ourselves for Top Suppliers 1.5″ hamburger head Water distributors F 182X for India Factory, The product will supply to all over the world, such as: Poland , Congo , Malawi , If you give us a list of solutions you are interested in, along with makes and models, we can send you quotations. Be sure to email us directly. Our goal is to establish long-term and mutually profitable business relationships with domestic and overseas clients. We look forward to receiving your reply soon.
In this video I show you how to replace both VTEC solenoid valve gaskets (valve to cylinder head and solenoid to valve) on 1994-1997 Accords.
This is a common cause of oil leaks on the upper passenger side of the engine next to the distributor shaft seal, distributor o ring, and valve cover gasket.
It seems the same engineers who buried the Accords fuel filter also decided to make the VTEC solenoid valve difficult to remove as well. One of the bolts for the valve is buried so deep you have to partially drain the cooling system and use a u-joint to get it out.
I take your through the process step by step from removal of all the parts to re installation.
This video ran a bit longer than I wanted it to but considering how deceptively easy this job looks at first glance (until you can’t get that one remaining hidden bolt on the valve off to remove it) I decided to leave in as much detail as possible.
You will need to add new coolant and bleed the cooling system to avoid engine damage after you’re done. If you need that info here is the link to my cooling system bleeding video.
Honda part numbers used in the video:
Solenoid to valve gasket: 36172-P0A-005
VTEC valve to cylinder head gasket: 15825-P0A-015
VTEC oil pressure switch o-ring: 91319-PR3-003
Thermostat housing to intake gasket: 91312-P0A-000
Thermostat housing to connecting pipe o-ring: 91314-PH7-003
These part numbers should work on all 1994-1997 Accords with VTEC but as always check with your dealer to confirm these part numbers will work with your vehicle.
Intro and outro music Hot Swing by Kevin Macleod (Incompetech.com).
Due to factors beyond the control of Bushougoma, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Bushougoma assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Bushougoma recommends safe practices when working with the tools or equipment seen or implied in this video. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Bushougoma.
Cheap, easy way to clean sweat stains off of a baseball cap.
Wanna keep your lid game tight? Check out PLNDR, where you can cop brands like Crooks and Castles, Supra, Mitchell and Ness, Mishka, and Vintage Deadstock for a fraction of the retail price!
Save an additional 10% by using repcode AFreshPair.
By Ryan 2016-10-01 11:44
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Marco 2016-9-28 14:43