Professional factory selling water distributor for water treatments FU6900B Export to Atlanta

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We not only will try our greatest to offer you outstanding products and services to every single buyer, but also are ready to receive any suggestion offered by our buyers for Direct operated normally open solenoid valve , Pressure Gauge , 2" pressure gauge , In a word, when you choose us, you choose a ideal existence. Welcome to visit our factory and welcome your get! For even further inquiries, remember to usually do not hesitate to make contact with us.
Professional factory selling water distributor for water treatments FU6900B Export to Atlanta Detail:

Feilite brine valve for water softener

Fob price :us1.5-4/piece

Min.order quantity:10 piece/pieces

Supply Ability: 20000 pieces per month

Port: Ningbo/Shanghai

Payment Terms: L/C,T/T

Place of Origin: Zhejiang, China (Mainland)

Brand Name: yujing

Model Number: FU6260

material:: PP and ABS

Supply type:: Make-to-Order

Certification:: ISO:9001

OEM:: Yes

Manufacturer:: Yes

Specification:

 

Packaging & Delivery

 

Packaging Details: Carton or as per your request
Delivery Detail: 7 to 15Days

 

6 laterals Water Distributor for water filter or strainer

 

Item no.

Dimensions(mm)

Diameter of tank (inches/mm)

Top opening

Gap

Rate of flow

A       B        C

FU6260

255  99  50/48.5

12″~16″ (Ø300~Ø400mm)

4”THREAD

0.25mm

10T/H-15T/H

 

 

 

 

 

 

FU6370

365  155  50/48.5

18″~21″ (Ø450~Ø550mm)

4”THREAD

0.25mm

FU6450

450  200  50/48.5

24″ (Ø600mm)

4”THREAD

0.25mm

FU6600

610  280  50/48.5

30″ (Ø750mm)

4”THREAD

0.25mm

FU6700

700  325  50/48.5

36″ (Ø900mm)

4”THREAD

0.25mm

FU6800

850  400  50/48.5

40″ (Ø1000mm)

4”THREAD

0.25mm

FU6900

940  445  50/48.5

48″ (Ø1200mm)

4”THREAD

0.25mm

 

High flow series:

Item no.

Dimensions(mm)

Diameter of tank (inches/mm)

Top opening

Gap

Rate of flow

A       B        C

FU6260B

310  132  50/48.5/63

16″~18″ (Ø400~Ø450mm)

4”THREAD

0.2mm/0.25mm/0.5mm

 

 

10T/H-20T/H

 

 

 

 

 

 

 

 

 

 

 

FU6370B

430 197  50/48.5/63

21″ (Ø550mm)

4”THREAD

0.2mm/0.25mm/0.5mm

FU6450B

500  227  50/48.5/63

24″ (Ø600mm)

4”THREAD

0.2mm/0.25mm/0.5mm

FU6600B

620  290  50/48.5/63

30″ (Ø750mm)

4”THREAD

0.2mm/0.25mm/0.5mm

FU6700B

750  353 50/48.5/63

36″ (Ø900mm)

4”THREAD

0.2mm/0.25mm/0.5mm

FU6800B

870  416  50/48.5/63

40″ (Ø1000mm)

4”THREAD

0.2mm/0.25mm/0.5mm

FU6900B

90  479  50/48.5/63

48″ (Ø1200mm)

4”THREAD

0.2mm/0.25mm/0.5mm

 


Product detail pictures:

Professional factory selling
 water distributor for water treatments FU6900B Export to Atlanta detail pictures


We insist to the theory of development of 'High excellent, Performance, Sincerity and Down-to-earth working approach' to deliver you with great provider of processing for Professional factory selling water distributor for water treatments FU6900B Export to Atlanta, The product will supply to all over the world, such as: Rwanda , Thailand , Mauritania , Now we have more than 10 years exported experience and our merchandise have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!


  • 1996 Jeep Grand Cherokee Laredo 4×4 with 5.2 V8 and automatic transmission. Full info below…

    Suspension Info:

    Rear is on RE 3.5″ XJ front springs. It has the IRO long arm kit with sub frame which allows fixed upper arms to be adjusted and the lowers are adjustable. Rear shocks are Doetsch Tech 8000 Prerunner Series part# 8403 which are 32″ extended, 18.7″ compressed, 13.3″ of travel with integrated bump stops. Rear uses a Rusty’s Offroad adjustable track bar. Rear drive shaft is stock with no issues.

    The front is on RE 3.5″ springs with JKS ACOS, Iron Rock Offroad long arms and IRO 3 piece subframe assembly. This kit has a one piece driver side control arm called the Iron Y which includes both the lower and upper arm in one piece with a caster adjuster. The passenger side uses only a lower control arm, no upper. Front shocks are Doetsch Tech 8000 Prerunner series part# 8421 which are 32″ extended, 18.25″ compressed, 13.75″ of travel. The shocks are mounted to IRO bar pin eliminators. Extended stainless steel brake lines were installed to support the additional lift and flex. Front uses a Rusty’s Offroad adjustable track bar with HD frame mount. Front drive shaft is a double cardan u-joint style to replace the OEM CV shaft which broke and also would not have worked with the long arm kit. JKS Quicker Disconnects which are adjustable are used on the front sway bar.

    Steering Info:

    Iron Rock Offroad OTK, over the knuckle, steering kit. The kit includes a 1.25″ solid cold rolled steel tie rod and drag link with 5/8″ grade 8 hardware. This required us to drill the steering knuckles on both sides as well as the drop pitman arm with a 5/8″ drill bit. The kit is very solid and no steering stabilizer is being used.

    Check out my other videos if you want more info on the steering box brace which has been a great addition since I’m running 35×12.50 tires. The steering box was recently replaced with a new one. We’ve swapped out the drop pitman arm for one that is about 2″ shorter than the one we had installed previously because it will work better with my lift and IRO OTK steering kit.

    Axle Info:

    The front is a Dana 30 with IRO almost alloy Spicer 760x u-joint shafts, Solid diff cover, stock gears, and no lockers. The CV differential yoke has been replaced with a u-joint yoke for the new drive shaft. The axle will soon be rebuilt with 4.88 gears, and Aussie locker. The font axle also has heavy duty Rusty’s Offroad lower control arm mounts to replace the bent stock ones.

    The rear is a Dana 44 with stock gears and no locker. It will soon be rebuilt with 4.88 gears and Aussie locker.

    Tires and Wheels:

    35×12.50×15 Goodyear Wrangler MT/R Kevlar on OEM 15×7 wheels with 2″ wheel spacers.

    Jeep also has IRO on board air, Rough Country 9500 lb winch and mounting plate, Taurus 2 speed electric fan and B&M Supercooler.

    5.2 V8 Engine Notes:

    The motor is finally dry as a bone, leak free thanks to Joel Gonzalez!!! Oil pan was dropped and rear main bearing cap was removed because the two piece rear main seal was leaking. The rear main seal was replaced and a high volume, 25% over stock, Melling oil pump was installed. The pan was resealed with a Fel-Pro one piece gasket. The timing chain had some slack in it so it was replaced along with new timing gears on the crankshaft and camshaft. A new timing cover was installed with a new front seal to replace the original timing cover which had a hole in it. The original harmonic balancer was cleaned up and reinstalled along with the original crankshaft pulley. A new water pump was installed with a new bypass hose to the intake manifold. The thermostat housing was replaced along with a new 185 thermostat and Fel-Pro gasket. A new tensioner was installed because the old one was nasty to say the least. The original broken EVAP canister, damaged by the front driver side tire, has been removed and replaced with a new relocated canister. A new power steering pump was installed.

    The motor also has an MSD external coil and K&N intake and air filter.

    Muffler was a Flowmaster 40 series cutoff before rear axle, but muffler has now been removed. Exhaust setup from muffler to engine is stock with brand new catalytic converter.

    Special Thanks: Thanks to my great friend and mechanic Joel Gonzalez for all of his hard work and dedication to Project ZJ. Thanks to Mario for selling me my first Jeep. Thanks to Nate and Mitchell for the awesome compressor mount. Thanks to Mark and Mike at All Muffler Service for their work on my exhaust and also for removing the stock lower control arm mounts in the front. Thanks to Rob at Les Schwab for all of the great advice and for doing my initial alignment. Thanks to Redline Tire for doing my final alignment and mounting and balancing my new tires. Thanks to all my loyal YouTube subscribers for their continued support and comments!!!



    Distributor Kangen Water di Cabangbungin Jawa Barat, 0852.1188.3938, http://www.jualkangenwaterjawabarat.com, Distributor Kangen Water di Bungursari Jawa Barat, Distributor Kangen Water di Bungbulang Jawa Barat, Distributor Kangen Water di Buahdua Jawa Barat, Distributor Kangen Water di Buahbatu Margacinta Jawa Barat, Distributor Kangen Water di Bongas Jawa Barat, Distributor Kangen Water di Bojongsoang Jawa Barat, Distributor Kangen Water di Bojongsari Jawa Barat, Distributor Kangen Water di Bojongpicung Jawa Barat, Distributor Kangen Water di Bojongmangu Jawa Barat

    Kami dari Distributor Kangen Water, Strong Acid, dan Beauty Water melayani pembelian atau order seluruh Indonesia. Bagi anda yang ingin order di daerah Jawa Barat silakan langsung kontak kami dibawah ini :

    SMS = 0852.1188.3938
    WA = 0852.1188.3938
    WHATS APP = 0852.1188.3938
    Website cabang Jawa Barat http://www.jualkangenwaterjawabarat.com
    Website Official http://www.KonsultanKangenWater.com

    Backsound by http://www.bensound.com/

    This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.

    5 Stars By Sharon 2016-10-25 18:05
    The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.

    5 Stars By Marco 2016-9-28 14:43

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Truck

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    WhatsApp Online Chat !