China Factory for vacuum pressue gauge all SS material 60MM oil filled pressure gauge YN60ZT-1.0Mpa Wholesale to Mombasa
China Factory for vacuum pressue gauge all SS material 60MM oil filled pressure gauge YN60ZT-1.0Mpa Wholesale to Mombasa Detail:
2.5 inch 63mm Steel material liquid filled hydraulic pressure gauge
Fob price :us1.5-4/piece
Min.order quantity:10 pieces
Supply Ability: 30000 pieces per month
Payment Terms: L/C,T/T
Place of Origin: Zhejiang, China (Mainland)
Brand Name: Yujing
Model Number: YN
Case material: Stainless steel or Steel or Plastic
Supply type: Make-to-Order
Pressure range: -1 to 1000bar
Case size: 1.5”(40mm), 2”(50mm), 2.5”(63mm), 3″(75mm),4″(100mm),6″(150mm)
Connection Style: Bottom connection or Back connection
Certification: ISO:9001-2008 and roHs
Liquid filling: With or without liquid
We are factory: Yes
Customize: Yes, we can make as per your request
Packaging & Delivery
Packaging Details: Carton or as per your request
Delivery Detail: Goods in stock
Place of origin:Zhejiang China
Dial Size:1.5″ (40mm), 2″(50mm), 2.5″(63mm), 4″(100mm), 6″(150mm)
Case:Steel or Stainless steel or black iron
Lens:Glass or Polycarbonate /Safety Glass
Mounting:Bottom/Back /Lower back entry /LBM with flange or bracket
Fill Liquid:Glycerin/silicone oil/dry
Thread: 3/8″~1″ or as per your request
Mounting:bottom mounted or center back
Product detail pictures:
With our exceptional administration, robust technical capability and strict high-quality control procedure, we carry on to provide our consumers with dependable high-quality, reasonable selling prices and superb providers. We aim at becoming amongst your most responsible partners and earning your pleasure for China Factory for vacuum pressue gauge all SS material 60MM oil filled pressure gauge YN60ZT-1.0Mpa Wholesale to Mombasa, The product will supply to all over the world, such as: Italy , Croatia , Greece , We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, in depth meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!
Why is there water at the bottom of my water softener?
There should be some water in the water softener; otherwise, it does not soften any water.
There’s more than there should be.
The water softener should have about a foot of water in it.
This is more.
A common problem is a bridge of salt around the edge of the tank at the water level. Another one is salt mush on the bottom of the tank.
There’s supposed to be salt in the tank.
Yes, but if the salt in the solution crystallizes on the bottom of the tank, you could end up with a layer of water on top of it.
There’s normally some dirt or debris on the bottom.
A few flecks of rust or dirt is normal. A mushy layer of salt is not.
What can I do to fix that?
You can try to scoop it out, or you can pour a bunch of hot water in the tank after removing the water to help dissolve it and get it down the drain.
That’s assuming that the water in the bottom of the water softener is not due to a blocked drain.
Dissolving the mush if you see it might fix the problem. So might checking the drain for blockages.
What could block the water softener drain?
Chunks of crystallized salt. Then again, it could be blocking the brine pick up tube, too, that pulls salt brine from the tank and sends it to the resin tank.
That could keep the salt brine from flowing but not extra water levels. Let’s try coming up with a solution other than salt.
The resin bed might need to be cleaned so the water softener can run properly.
I’ve heard of resin bed cleaner being offered by the water softener tech, but I’d rather just replace the resin bed material.
You could have water building up because the pumps are not working.
I know it sounds weird, but I’d notice if it was not running.
Because of the hard water requiring more effort to soap up and wash off?
No, the silence.
At least you do not have problems with rust in the water softener because it isn’t designed to handle the iron in the water. If you needed that but didn’t have it, the unit would be prone to rusting and leaking.
That does not prevent a valve leaking water into the unit.
True, but the water leaking in would at least be obvious. Then again, water leaking into the basement and dripping into the tank is not as obvious, unless you’ve got water on the floor.
I think I need to call in a plumber before I do get water overflowing the water softener onto the floor.
By Danny 2016-9-14 19:18
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Joseph 2016-3-18 10:14